Artist Page:Select Fixture Parameter

This system command sets the Active Fixture Parameter to allow external adjustment.

Defined by Parameter a bit confusing! This means the selected parameter is defined by the input parameter (part of the MIDI message) Parameter n selects the specified fixture parameter n

You can use switched or level control with this commands.

White key selection of Parameter This example shows how to connect the first 5 white keys of a MIDI keyboard to the first 5 parameters of the current fixture group.

Select MIDI port.

Select 'Note on/off'

Set a count of 5

Set the MIDI channel

Select 'White notes'

Select C2

Select 'Select Parameters'

Select 'Parameter 1'

Fader selection of Parameters This example shows how to use a MIDI fader to select fixture parameters.

Select MIDI port.

Select 'Control change'

Set a count of 1

Set MIDI channel

Select controller (e.g. 77 - Chorus depth)

Select 'Select Parameter' system command

Select 'Defined by Parameter'