Artist Page:Dynamic Fader

This command connects linear data with the displayed client view. The functionality depends on the view.

Fixture Group When a Fixture Group is displayed in the client area this command will control the active parameter as displayed in the Fixture Control toolbar. The active parameter can be selected by the Select Fixture Parameter system command.

The offset is a value added to the parameter value to give the index of the fixture to be adjusted. This will depend on how many axis of control the selected parameter has.

The up-shot is that in the case of a dimmer parameter the fader will set the level of the active fixtures.

In case of a colour mix parameter the first three faders will control red (cyan), green (magenta) and blue (yellow).

In the case of a 16 bit yoke parameter the first fader is pan MSB, the second pan LSB, the third is tilt MSB and the fourth is tilt LSB.

Cue List When a Cue List is displayed in the client area this command controls the levels of the cues in the list with fader 1 controlling cue 1, fader 2 - cue 2, etc.