Artist Help:Parameter Properties Presets

The preset level is used to test a fixture and to provide usefull programming levels.

Dimmer

For dimmers this level should be maximum. This will provide a light on function and will allow you to see the other parameters as they are being tested.

Mirror and Yoke

For mirrors and yokes this should be approximately 50% tilt and 50% pan. In other words in the middle of the range of movement. This will provide a useful position for the beam during testing.

Gobo, Color, Effect, Rotate

These parameters should be usually zero. In other words no color, gobo, effect or rotate.

Iris

The iris should be set to maximum beam width.

Focus

Choose a level which would focus a gobo at a useful distance from rig to floor.

Shutter

The shutter level should be open.