Knowledge Base:DMX Input

From ShowCAD Wiki
Revision as of 17:01, 13 May 2024 by MickShowCAD (talk | contribs) (Created page with "DMX Input by Mick Martin | Feb 28, 2012 | Knowledge Base The ShowCAD USB-DMX interface as both male and female connectors. The male connector allows the interface to inputDMX from another source such as a lighting desk. Install the interface as normal Run Artist go to Navigator/Resources/Interface Manager open the ShowCAD USB branch and locate the interface right-click on it and select properties change the mode from output to input save and restart Artist Now you can...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

DMX Input by Mick Martin | Feb 28, 2012 | Knowledge Base

The ShowCAD USB-DMX interface as both male and female connectors. The male connector allows the interface to inputDMX from another source such as a lighting desk.

Install the interface as normal Run Artist go to Navigator/Resources/Interface Manager open the ShowCAD USB branch and locate the interface right-click on it and select properties change the mode from output to input save and restart Artist Now you can monitor the incoming DMX data in Status/Output by clicking on Input and selecting the interface.

Use the patch wizard to patch DMX channels to Artist functions.

Retrieved from ‘https://www.wiki.showcad.dotnetcloud.co.uk/index.php?title=Knowledge_Base:DMX_Input&oldid=32’