Artist Help:Automatically Strike Discharge Lamps

From ShowCAD Wiki
Revision as of 20:20, 14 May 2024 by MickShowCAD (talk | contribs) (Created page with "Often you may want to strike the lamps of you fixtures automatically when Artist boots up. From the main menu select Tools/Preferences Select the Start Up tab check the Lamp ON box. click OK to close. The next time Artist boots up it will issue a lamp strike to all fixtures. The lamp strike command can also be accessed via a System Command. The system command can be accessed from an external source (e.g. MIDI message) or from a Real time event. This would allow...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Often you may want to strike the lamps of you fixtures automatically when Artist boots up.

From the main menu select Tools/Preferences

Select the Start Up tab

check the Lamp ON box.

click OK to close.

The next time Artist boots up it will issue a lamp strike to all fixtures.

The lamp strike command can also be accessed via a System Command. The system command can be accessed from an external source (e.g. MIDI message) or from a Real time event. This would allow you to strike the fixture lamps at a specific time of day.

Retrieved from ‘https://www.wiki.showcad.dotnetcloud.co.uk/index.php?title=Artist_Help:Automatically_Strike_Discharge_Lamps&oldid=263’