Artist Help:Pathport

From ShowCAD Wiki
Revision as of 14:03, 18 May 2024 by MickShowCAD (talk | contribs) (Created page with " DMX Ethernet Gateway at http://www.pathwayconnect.com Artist can send and receive DMX data on the Pathport protocol. This provides Artist with up to 32,000 DMX channels in addition to those provided by the other supported interfaces. See Pathway Connectivity web site for a detail description of setting up a Pathport network. In general you will setup your Pathport network using the Pathport Manager (supplied by Pathway). Pathport is not enabled by default. Open I...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
DMX Ethernet Gateway at http://www.pathwayconnect.com

Artist can send and receive DMX data on the Pathport protocol. This provides Artist with up to 32,000 DMX channels in addition to those provided by the other supported interfaces.

See Pathway Connectivity web site for a detail description of setting up a Pathport network.

In general you will setup your Pathport network using the Pathport Manager (supplied by Pathway).

Pathport is not enabled by default. Open Interface Manager/Pathport/Properties to enable.

Nodes

The Interface Manager displays the connected Pathport nodes it has found on the network. Right-click and select 'Properties' to make limited changes.

Ports

Under each node are the Ports (i.e. actual physical DMX outputs) provides by the port. Right-click and select 'Properties' to make limited changed.

xDMX Sources

Artist treats the xDMX as 64 lines, each of 512 channels, of DMX512 and these are all provided on the xDMX data transport within the protocol. Not all of these lines (or, in Pathport parlance, 'Sources') need be used.

Retrieved from ‘https://www.wiki.showcad.dotnetcloud.co.uk/index.php?title=Artist_Help:Pathport&oldid=655’