Knowledge Base:DMX Input: Difference between revisions
MickShowCAD (talk | contribs) (Created page with "DMX Input by Mick Martin | Feb 28, 2012 | Knowledge Base The ShowCAD USB-DMX interface as both male and female connectors. The male connector allows the interface to inputDMX from another source such as a lighting desk. Install the interface as normal Run Artist go to Navigator/Resources/Interface Manager open the ShowCAD USB branch and locate the interface right-click on it and select properties change the mode from output to input save and restart Artist Now you can...") |
MickShowCAD (talk | contribs) m (MickShowCAD moved page DMX Input to Knowledge Base:DMX Input) |
(No difference)
| |
Latest revision as of 21:24, 14 May 2024
DMX Input by Mick Martin | Feb 28, 2012 | Knowledge Base
The ShowCAD USB-DMX interface as both male and female connectors. The male connector allows the interface to inputDMX from another source such as a lighting desk.
Install the interface as normal Run Artist go to Navigator/Resources/Interface Manager open the ShowCAD USB branch and locate the interface right-click on it and select properties change the mode from output to input save and restart Artist Now you can monitor the incoming DMX data in Status/Output by clicking on Input and selecting the interface.
Use the patch wizard to patch DMX channels to Artist functions.