Artist Help:Profile Properties

Properties Dialog

Template Name	enter the name to be given to this template.
Fixture Port Type	this function is not used currently.
Image	select the image that will be displayed in list and tree views to present this template and its created fixtures.

These are common functions that a fixture performs. These are functions such as Reset, Lamp On and Lamp Off. If a fixture has these functions the template should make use of functions since these three functions are easily accessible in a global way within Artist.

List	this displays the list of parameters defined in this template. Use the check box to select a parameter as part of the selected function. Click on the name of the parameter to display its control in the Control pane.
Function	this combo box lists the available functions. Select the one you wish to define. Already defined function are displayed with a red button and undefined with a gray button.
Time	set the time that the levels should be presented to the fixture for in order to activate the function. This cannot be zero..
Control	when a parameter is checked in the list, the control is displayed here to allow level adjustment.

To define a Function

• Select the function you wish to define from the combo box
• In the List view click the check box(es) of the parameter(s) that need to be set in order to access the function.
• select each parameter name in turn. The parameter control will appear. Set its required level.
• set the time that these values are required to be present on the parameters in order to perform the function.

When you create a template you need not pay any attention to the order in which parameters are defined. This dialog allows you to correctly assign channel offsets to the parameters.

Dialog Control Functions

List	displays the offsets assigned to parameters. Select the offset you wish to change and use the Move up or Move down buttons to change its position.
Move Up	Moves the selected offset up the list. Its offset value will change accordingly
Move Down	Moves the selected offset down the list. Its offset value changes accordingly.