Editing Artist Page:Select Fixture Parameter

This system command sets the Active Fixture Parameter to allow external adjustment.

Defined by Parameter a bit confusing! This means the selected parameter is defined by the input parameter (part of the MIDI message) 
Parameter n selects the specified fixture parameter n 

 

You can use switched or level control with this commands.

White key selection of Parameter
This example shows how to connect the first 5 white keys of a MIDI keyboard to the first 5 parameters of the current fixture group.

Select MIDI port. 

Select 'Note on/off' 

Set a count of 5 

Set the MIDI channel 

Select 'White notes' 

Select C2 

Select 'Select Parameters' 

Select 'Parameter 1' 

Fader selection of Parameters
This example shows how to use a MIDI fader to select fixture parameters.

Select MIDI port. 

Select 'Control change' 

Set a count of 1 

Set MIDI channel 

Select controller (e.g. 77 - Chorus depth) 

Select 'Select Parameter' system command 

Select 'Defined by Parameter'