Editing Artist Help:Profile Properties

{| class="wikitable"
|+ Properties Dialog
|-
| Template Name || enter the name to be given to this template. 
|-
| Fixture Port Type || this function is not used currently. 
|-
| Image || select the image that will be displayed in list and tree views to present this template and its created fixtures. 
|}

These are common functions that a fixture performs. These are functions such as Reset, Lamp On and Lamp Off. If a fixture has these functions the template should make use of functions since these three functions are easily accessible in a global way within Artist.

{| class="wikitable"
|-
| List || this displays the list of parameters defined in this template. Use the check box to select a parameter as part of the selected function. Click on the name of the parameter to display its control in the Control pane. 
|-
| Function || this combo box lists the available functions. Select the one you wish to define. Already defined function are displayed with a red button and undefined with a gray button. 
|-
| Time || set the time that the levels should be presented to the fixture for in order to activate the function. This cannot be zero.. 
|-
| Control || when a parameter is checked in the list, the control is displayed here to allow level adjustment. 
|}

=== To define a Function ===
* Select the function you wish to define from the combo box 
* In the List view click the check box(es) of  the parameter(s) that need to be set in order to access the function. 
* select each parameter name in turn. The parameter control will appear. Set its required level. 
* set the time that these values are required to be present on the parameters in order to perform the function. 

When you create a template you need not pay any attention to the order in which parameters are defined. This dialog allows you to correctly assign channel offsets to the parameters.

{| class="wikitable"
|+ Dialog Control Functions
|-
| List || displays the offsets assigned to parameters. Select the offset you wish to change and use the Move up or Move down buttons to change its position. 
|-
| Move Up || Moves the selected offset up the list. Its offset value will change accordingly 
|-
| Move Down || Moves the selected offset down the list. Its offset value changes accordingly. 
|}