Editing Artist Help:Patch Wizard Data

{| class="wikitable"
|+ Caption text
|-
| Port || Select the port (or byte) of the digital input device to receive 
|-
| Action type || 
{| class="wikitable"
|-
| BCD byte || Receive the whole byte and use the binary coded decimal value (0 to 255) to pass to the command. 
|-
| BCD byte pulse || Receives a byte as a pulse. It assumes that the inputs will return to zero. Thus valid codes are 1 to 255. 

|-| BCD nibble low || Receive the lower nibble and use the binary coded decimal value (0 to 15) to pass to the command. 
|-
| BCD nibble low pulse || Receives the lower nibble as a pulse. It is assumed that the inputs will return to zero. Thus valid codes are in the range 1 to 15 
|-
| BCD nibble high || Receive the upper nibble and use the binary coded decimal value (0 to 15) to pass to the command. 
|-
| BCD nibble high pulse || Receives the upper nibble as a pulse. It is assumed that the inputs will return to zero. Thus valid codes are in the range 1 to 15 
|-
| input line - || Receive a bit and pass to command on high to low transition. 
|-
| Input line + || Receive a bit and pass to command on low to high transition. 
|-
| input line both || Receive a bit and pass to command on either the high to low or low to high transitions. 
|}
|-
| Select input || 
{| class="wikitable"
|-
| Input || Select the specific input line of the port to receive. 
|-
| BCD || If you select nibble or byte 'Input value', the BCD value of that part of the input port will be passed to the command. This will result in a command for each value of 1 to 15 for a nibble and 1 to 255 for a byte. 
If you select an absolute value, the command is triggered only when that value appear on the input nibble 9or port.
|}
|}
 
A bit is regarded as a single input line. 

A byte is 8 bits. This is the size of a port of a digital interface device.

A nibble is 4 bits. Thus a digital interface port has 2 nibble designated upper (input 5 - 8 ) and lower (inputs 1 - 4)