Editing Artist Help:Fixture Group Properties

=== Group ===
This tab contains general properties for the fixture in the group.
{| class="wikitable"
|+ Group Details
|-
| Group name || enter the name of the fixture group 
|-
| Mode || 
{| class="wikitable"
|-
| Normal || the active parameters of each fixture are displayed as square icons on the fixture grid 
|-
| All Parameters || displays all the fixture parameters in a graphic list
|-
| Scaled || Scales the full fixture grid to fit in the client area
|}
|-
| Hide Fixtures || check this to hide long lists of fixtures under the fixture group in the navigator. This can speed up the loading of the navigator.
|-
| Fixture Position Lock || check this to lock the positions of fixtures on the grid. 
|}

=== Grid ===
This tab is used to set up and define the fixture grid.
{| class="wikitable"
|+ Grid Details
|-
| Snap Fixture to Grid || if checked, when moving fixtures on the grid the position will snap to the grid lines.
|-
| Show Fixture Name || if checked, the fixture names are displayed under the fixture icon. 
|-
| Display Active Parameter || if checked, the fixture active parameter is displayed in the fixture icon.
|-
| Default Matrix || this defines the default matrix arrangement for use by chases or effects 
|-
| View || By default a fixture group has a dedicated view of its own. You can, however, select a specific view (between 1 and 32) on which to display the fixtures. This means that more than one fixture group can share a view allowing them to be displayed simultaneously. 
|-
| Horz || set the horizontal size in grid units of the fixture grid
|-
| Vert || set the vertical size in grid units of the fixture grid 
|}
 
=== Canvas ===
This tab is used to setup and define the effect canvas. The effect canvas is only displayed when showing Pixel Array parameters.
{| class="wikitable"
|+ Canvas settings
|-
| Effect || this sets the brightness off the masked effect canvas in order to see the whole effect.
|-
| Background || this sets the brightness of the Background image. 
|-
| Padding || this displays padding between the pixel and the pixel border. 
|-
| Border || this displays a fixture border. 
|-
| Background Filename || this set the filename of the background image displayed in the effect canvas. This image is not output to the fixture but is used as a useful representation of the pixel locations. 
|-
| Horz || this is the horizontal resolution of the effect graphics surface. 
|-
| Vert || this is the vertical resolution of the effect graphics surface.
|-
| Rotate Snap Angle || this sets the rotational snap angle in degrees. 
|-
| Positional Snap || this sets the positional snap of the fixture in fraction of canvas height and width.
|}