Editing Artist Help:Create Momentary Cue

You make an individual cue deactivate after a period of time. This you might want to do for smoke machines or strobe lighting.

In the case of strobes you can add a chase with a count of one to a cue. This will mean that when the cue is activated the chase will run through once only. The cue, in this case, will continue to be active.

In the case of a smoke machine you can open the cue's Control Panel and set the hold time to four seconds, for example, and check the 'Hold Times' box. This will mean that when the cue is activated it will remain in that state for four seconds - after the fade in if any - and then either fade out and deactivate or just deactivate if not fade out time is set.