Editing Artist Help:Create a blank Cue (section)

=== To add a System Command ===

* Right-click on the Cue to which to add the system command. 
* Select 'Add Embedded Command' to open the Command Wizard. 
* The first page will give no options. Click next>>. 
* Select the command. In this case 'Serial Output' and click Next>>. 
* Select the serial COM port to send the message out on. If none are shown you must see the help on the Communications Manager 
* Enter the message string to send. This will require knowledge of the serial device messages. Click Next>>. 
* Check the summary and click End. 

You can follow the same procedure for each of the steps in your scene. Be aware that if you set the chase speed too high when playing this chase it may cause a system blockage when sending out too many long serial messages.

In the client area now you can display the Cue list with your new cues in it and click on the Activate buttons to see the results. Likewise with the scenes.

If you then want to incorporate the scenes in to a new cue,