Editing Artist Help:Example Parcans (section)

=== The Method ===

The Theatre Interface was used to set the levels on the par cans while viewing the output in the Fixture View.

The levels for the first cue were set using the faders and clicking New Cue. The All Parameters filter in the Program Data dialog was selected and Save + No Clear to save the cue and leave the output levels as they are for further programming. 

This method was used for the following two cues.

The fourth cue requires the parameter levels to be zeroed. The Fixture Control/Chases window was used to set up a chase on the par cans and New Cue clicked to save this using Save + No Clear.

With the chase from the previous cue still running a level was added to all the par cans using the faders again. Since these values add together with the running chase the master level of the chase was reduced to preserve the smooth fader in of each step.