Editing Artist Help:Time Control

This displays the status of the various timing sources.

{| class="wikitable"
|+ Caption text
|-
| Real Time || this is the computer's real time clock and calendar. Check the box to have the Real time events automatically start when Artist is launched.
You can open the Sunrise dialog from here. The current sunrise and sunset times are displayed.

You open the Scheduler dialog from here. The name of teh next event is displayed.
|-
| MIDI Time || MIDI input can provide time-code (MTC) to the Artist from an external media source such as tape or CD/DVD. If you are using an interface card that has a SMPTE input, the card's driver will send MTC messages to Artist otherwise you will need an external MTC/SMPTE sync unit. 
|-
| Audio Time || Windows resident audio waves such as AVI, MP3 etc., can be used as a time-code source. 
You can output the time code from the audio file by selecting a MIDI output port from the combobox to output MIDI Time Code. 
|-
| Video Time || Video clips can be used as time code sources.
You can output the time code from the video file by selecting a MIDI output port from the combobox to output MIDI Time Code. 
|-
| CD Audio Time || this is time-code from the audio or video on loaded media such as DVD or CD  
|}
 
For each of the above sections there is a row of mode control buttons.

{| class="wikitable"
|+ Caption text
|-
| Record || this places the appropriate section in to record mode. It captures 'Space bar' presses and enters stamped events without system commands which can be added later. It will also capture cue activations. 
|-
| Play || this puts the event file into playback mode. Events are triggered as the time code stream is input. 
|-
| Stop || this is stopped. No events will trigger. 
|}

=== Creating Time Code Event files ===

See Timed Events.

=== Auto Start ===

The Auto start check box, if checked, will cause the transport to be in play mode when the event file is loaded or when artist is booted up. This means as time code is input, events will be triggered.

=== Marking time code events ===

Placing the required media transport in to Record mode will start capturing user input events.

You can use the 'QWERTY' keyboard 'SPACE BAR' to mark events at the appropriate times. This will add time stamped events in the time code file. You can stop at any time and edit the events to set the requires System commands. It is possible to restart the recording at any time to append new events. Regardless of the time they will be added to the end of the list.    The 'Sort' command can be used to put the events in a readable order.

=== Recording Cue Activations ===

With the appropriate transport in Record mode any Cue activations are added as events to the time code file. These as stamped with the time they occurred and with a system command that accesses the cue in question.

This means you can place your time code file in record mode and just activate cue when you require and they will be added complete with the correct system command to the list.