Editing Artist Help:Fade Attributes

The way that a parameter behaves in response to a cue or scene is determined by its default fade attribute which can be altered by right-clicking on the link and selecting Fade Attribute. You can select multiple links in order to change them simultaneously.

=== Parameter and Scene Attributes ===

{| class="wikitable"
|+ Caption text
|-
| Linear || the link fades the output element in a linear and dipless manner. 
|-
| Non-Return to Zero || same as Dipless except the output does not return to zero. 
|-
| Snap at start of fade in || the link snaps the output to the required level at the beginning of a fade.
|-
| Snap at top of fade in || the link snaps the output to the required level at the end of a fade.  
|-
| Snap on both || not defined. 
|}

A link is given one of the above values when stored in a cue. See the information on parameter or scene to understand the default values assigned.

{| class="wikitable"
|+ Embedded System Command Attributes
|-
| Command at start of fade in || the command will be trigger when the parent cue or step is activated. 
|-
| Command at top of fade in || the command will trigger when the parent cue or step fade in completes.
|-
| Command at start of fade out || the command will be triggered as the parent cue or step fade out starts.
|-
| Command at bottom of fade out || the command will be triggered when the parent cue or step deactivates.
|}

=== Default Parameter Fade Attributes ===

This table shows the default fade attributes set when you save a cue or scene.

{| class="wikitable"
|+ Caption text
|-
! Parameter !! Attribute 
|-
| Dimmer || Linear 
|-
| Mirror || NRZ 
|-
| Yoke || NRZ 
|-
| Color || Select Snap at Start 
|-
| Gobo || Select Snap at Start 
|-
| Color Mix || Linear 
|-
| Shutter || Snap at Start 
|-
| Effect || Snap at Start 
|-
| Focus || Linear 
|-
| Rotate || Linear 
|-
| Iris || Linear 
|-
| Function || Snap at Start 
|}

=== Scene Fade Attributes ===

The default fade attribute can be change so that each time a scene is used in a cue the altered attribute will be used.

[[Artist Help:Scene Static|Scene Static]]
[[Artist Help:Scene Sequence|Scene Sequence]]